@ 
Showcase FreeFrame Packs Mix With Keys 2.6
Showcase FreeFrame Packs Mix With Keys 2.6
Mix With Keys 2.6
Keying, and blending by alpha (transparency); this pack gives an assortment of modes to achieve matte/blending, often used to combine main elements onto backdrops, or making interesting combinations. These are 2-input filters that modifies the transparency of one input, and then draws it onto the other, making the other shine through in different ways.
Isc KeyChroma1
Inputs: 1 to 2
Parameters: 5
IntrinsicFX
KeyChroma1
Finally a FAST ChromaKey! I know many folks have been waiting for this one! This version lets you choose RED, GREEN or BLUE as the key color...
|
IntrinsicFX KeyChroma1
Finally a FAST ChromaKey! I know many folks have been waiting for this one! This version lets you choose RED, GREEN or BLUE as the key color... |
ID: ix36Version: 2.6Parameters: 5Inputs: 1 to 2System: PC or Mac
Parameters
Parameters
(1)Ramp Start
Default Value: 0.00
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
Default Value: 0.00
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
(2)Ramp Stop
Default Value: 0.28
Ramp for the chroma-calculation in area of transition between opaque and transparent.
Default Value: 0.28
Ramp for the chroma-calculation in area of transition between opaque and transparent.
(3)Ramp Sine
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
(4)Color Mode
Default Value: 0.40
Switch between the traditional GreenScreen and using red or blue as transparent instead.
Default Value: 0.40
Switch between the traditional GreenScreen and using red or blue as transparent instead.
(5)Switch Inputs
Default Value: 1.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Default Value: 1.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Isc KeyChroma2
Inputs: 1
Parameters: 7
IntrinsicFX
KeyChroma2
Another version, this one allowing you to specify a RGB value to use as key, any color can be used as key!..
|
IntrinsicFX KeyChroma2
Another version, this one allowing you to specify a RGB value to use as key, any color can be used as key!.. |
ID: ix37Version: 2.6Parameters: 7Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Key Red
Default Value: 0.00
Arbitrary color key: red component.
Default Value: 0.00
Arbitrary color key: red component.
(2)Key Green
Default Value: 0.00
Arbitrary color key: green component.
Default Value: 0.00
Arbitrary color key: green component.
(3)Key Blue
Default Value: 1.00
Arbitrary color key: blue component.
Default Value: 1.00
Arbitrary color key: blue component.
(4)Ramp Start
Default Value: 0.00
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
Default Value: 0.00
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
(5)Ramp Stop
Default Value: 0.28
Ramp for the chroma-calculation in area of transition between opaque and transparent.
Default Value: 0.28
Ramp for the chroma-calculation in area of transition between opaque and transparent.
(6)Ramp Sine
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
(7)Switch Inputs
Default Value: 0.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Default Value: 0.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Isc KeyChroma3
Inputs: 1
Parameters: 4
IntrinsicFX
KeyChroma3
This one is a ChromaKey attempting to automatically find the right KEY color, it is not perfect, but does a good job with the right clips!..
|
IntrinsicFX KeyChroma3
This one is a ChromaKey attempting to automatically find the right KEY color, it is not perfect, but does a good job with the right clips!.. |
ID: ix38Version: 2.6Parameters: 4Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Ramp Start
Default Value: 0.50
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
Default Value: 0.50
Start value for transition from transparent to opaque, all colors beneath this detected value will be 100% transparent.
(2)Ramp Stop
Default Value: 0.55
Ramp for the chroma-calculation in area of transition between opaque and transparent.
Default Value: 0.55
Ramp for the chroma-calculation in area of transition between opaque and transparent.
(3)Ramp Sine
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
Default Value: 0.00
Use linear interpolation or a smoother sine interpolation in the transition area where transparency is partial.
(4)Switch Inputs
Default Value: 0.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Default Value: 0.00
Switch input 1 and input 2 to produce oppposite transparency values for reverse keying/masking.
Isc KeyLuma1
Inputs: 2
Parameters: 5
IntrinsicFX
KeyLuma1
Uses luminousity/brightness (averaged red, green and blue) as transparency...
|
IntrinsicFX KeyLuma1
Uses luminousity/brightness (averaged red, green and blue) as transparency... |
ID: ix0tVersion: 2.6Parameters: 5Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Smooth Min
Default Value: 0.00
Minimum smoothing (in transparency transition) for the keying.
Default Value: 0.00
Minimum smoothing (in transparency transition) for the keying.
(2)Smooth Max
Default Value: 0.20
Maximum smoothing (in transparency transition) for the keying.
Default Value: 0.20
Maximum smoothing (in transparency transition) for the keying.
(3)Brightness
Default Value: 0.50
Range, distance in color space from color value of input 3 to process, smoothing occurs when within this range, and based on the distance per pixel.
Default Value: 0.50
Range, distance in color space from color value of input 3 to process, smoothing occurs when within this range, and based on the distance per pixel.
(4)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(5)Inverse
Default Value: 0.00
Invert the color values of input 2, experimental.
Default Value: 0.00
Invert the color values of input 2, experimental.
Isc KeyLumaRGB1
Inputs: 2
Parameters: 7
IntrinsicFX
KeyLumaRGB1
Slightly similar to a chroma key, well a variation of it, processes transparency based on brightness separately for red, green and blue...
|
IntrinsicFX KeyLumaRGB1
Slightly similar to a chroma key, well a variation of it, processes transparency based on brightness separately for red, green and blue... |
ID: ix0uVersion: 2.6Parameters: 7Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Smooth Min
Default Value: 0.00
Minimum smoothing (in transparency transition) for the keying.
Default Value: 0.00
Minimum smoothing (in transparency transition) for the keying.
(2)Smooth Max
Default Value: 0.20
Maximum smoothing (in transparency transition) for the keying.
Default Value: 0.20
Maximum smoothing (in transparency transition) for the keying.
(3)Red Val
Default Value: 0.50
Range, distance in color space red component, from color value of input 3 to process, smoothing occurs when within range, and based on the red value distance per pixel.
Default Value: 0.50
Range, distance in color space red component, from color value of input 3 to process, smoothing occurs when within range, and based on the red value distance per pixel.
(4)Green Val
Default Value: 0.50
Range, distance in color space green component, from color value of input 3 to process, smoothing occurs when within range, and based on the green value distance per pixel.
Default Value: 0.50
Range, distance in color space green component, from color value of input 3 to process, smoothing occurs when within range, and based on the green value distance per pixel.
(5)Blue Val
Default Value: 0.50
Range, distance in color space blue component, from color value of input 3 to process, smoothing occurs when within range, and based on the blue value distance per pixel.
Default Value: 0.50
Range, distance in color space blue component, from color value of input 3 to process, smoothing occurs when within range, and based on the blue value distance per pixel.
(6)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(7)Inverse
Default Value: 0.00
Invert the color values of input 2, experimental.
Default Value: 0.00
Invert the color values of input 2, experimental.
Isc KeyFoldsRGB1
Inputs: 2 to 3
Parameters: 4
IntrinsicFX
KeyFoldsRGB1
Producing some interesting results if used with pre-blurred inputs, a color cycle based on brightness.
Note: I used blur on input 2 before the effect in the preview...
|
IntrinsicFX KeyFoldsRGB1
Producing some interesting results if used with pre-blurred inputs, a color cycle based on brightness. Note: I used blur on input 2 before the effect in the preview... |
ID: ix0vVersion: 2.6Parameters: 4Inputs: 2 to 3System: PC or Mac
Parameters
Parameters
(1)Nr Folds
Default Value: 0.40
Number of times to loop (cycle through) the internal lookup colorbuffer in the recalculation of colors for output.
Default Value: 0.40
Number of times to loop (cycle through) the internal lookup colorbuffer in the recalculation of colors for output.
(2)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(3)Multiply Blend
Default Value: 1.00
Multiplication of input 3 before calculation.
Default Value: 1.00
Multiplication of input 3 before calculation.
(4)Multiply IN 1
Default Value: 0.00
Multiplication of input 1 before calculation.
Default Value: 0.00
Multiplication of input 1 before calculation.
Isc KeyFoldsRGB2
Inputs: 2 to 3
Parameters: 6
IntrinsicFX
KeyFoldsRGB2
Slightly same as the other one but different algorithm, different result.
Note: I used blur on input 2 before the effect in the preview...
|
IntrinsicFX KeyFoldsRGB2
Slightly same as the other one but different algorithm, different result. Note: I used blur on input 2 before the effect in the preview... |
ID: ix0wVersion: 2.6Parameters: 6Inputs: 2 to 3System: PC or Mac
Parameters
Parameters
(1)Nr Red Folds
Default Value: 0.10
Number of loops of color values, for red color component.
Default Value: 0.10
Number of loops of color values, for red color component.
(2)Nr Green Folds
Default Value: 0.10
Number of loops of color values, for green color component.
Default Value: 0.10
Number of loops of color values, for green color component.
(3)Nr Blue Folds
Default Value: 0.10
Number of loops of color values, for blue color component.
Default Value: 0.10
Number of loops of color values, for blue color component.
(4)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(5)Multiply Blend
Default Value: 1.00
Multiplication of input 3 before calculation.
Default Value: 1.00
Multiplication of input 3 before calculation.
(6)Multiply IN 1
Default Value: 0.00
Multiplication of input 1 before calculation.
Default Value: 0.00
Multiplication of input 1 before calculation.
Isc KeyStamp1
Inputs: 2
Parameters: 4
IntrinsicFX
KeyStamp1
Using the value from stamp ink between input1 and input2, as transparency instead of showing the stamp ink value...
|
IntrinsicFX KeyStamp1
Using the value from stamp ink between input1 and input2, as transparency instead of showing the stamp ink value... |
ID: ix0zVersion: 2.6Parameters: 4Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 1.00
Blend for the keying, if zero, only render input 1.
Default Value: 1.00
Blend for the keying, if zero, only render input 1.
(2)Inverse
Default Value: 1.00
Invert the color values of input 2, experimental.
Default Value: 1.00
Invert the color values of input 2, experimental.
(3)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(4)Stamp 3<>1 3<>2
Default Value: 0.00
If to get blend value (per pixel) from abs(input 1 - input 3) or abs(input 2 - input 3).
Default Value: 0.00
If to get blend value (per pixel) from abs(input 1 - input 3) or abs(input 2 - input 3).
Isc KeyInvColBur1
Inputs: 2
Parameters: 4
IntrinsicFX
KeyInvColBur1
Using the result of inverse color burn input1 and input2 as transparency rather than displaying the inverse color burn...
|
IntrinsicFX KeyInvColBur1
Using the result of inverse color burn input1 and input2 as transparency rather than displaying the inverse color burn... |
ID: ix14Version: 2.6Parameters: 4Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 1.00
The amount of input 2 to key onto input 1, blend/fade to only input 1.
Default Value: 1.00
The amount of input 2 to key onto input 1, blend/fade to only input 1.
(2)Inverse
Default Value: 1.00
Invert the color values of input 2, experimental.
Default Value: 1.00
Invert the color values of input 2, experimental.
(3)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(4)XOR 3<>1 3<>2
Default Value: 0.00
Use input 1 or input 2 with input 3 for calculation.
Default Value: 0.00
Use input 1 or input 2 with input 3 for calculation.
Isc KeyDifferenc1
Inputs: 2
Parameters: 4
IntrinsicFX
KeyDifferenc1
Takes Difference ink between inputs and uses the difference value for transparency instead of displaying the difference value...
|
IntrinsicFX KeyDifferenc1
Takes Difference ink between inputs and uses the difference value for transparency instead of displaying the difference value... |
ID: ix10Version: 2.6Parameters: 4Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 1.00
How much (mixing) the mask impacts the input drawn onto the other input.
Default Value: 1.00
How much (mixing) the mask impacts the input drawn onto the other input.
(2)Inverse
Default Value: 1.00
Invert the color values of input 2, experimental.
Default Value: 1.00
Invert the color values of input 2, experimental.
(3)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(4)Stamp 3<>1 3<>2
Default Value: 0.00
If to get blend value (per pixel) from abs(input 1 - input 3) or abs(input 2 - input 3).
Default Value: 0.00
If to get blend value (per pixel) from abs(input 1 - input 3) or abs(input 2 - input 3).
Isc KeyCellular1
Inputs: 2 to 3
Parameters: 5
IntrinsicFX
KeyCellular1
As title says, using the cellular effect for transparency. This lets you combine two images in a cellular blending...
|
IntrinsicFX KeyCellular1
As title says, using the cellular effect for transparency. This lets you combine two images in a cellular blending... |
ID: ix01Version: 2.6Parameters: 5Inputs: 2 to 3System: PC Only
Parameters
Parameters
(1)Motion Fade
Default Value: 0.50
The amount of coordinate change/fade between frames.
Default Value: 0.50
The amount of coordinate change/fade between frames.
(2)Nr Of Coords
Default Value: 0.20
Number of coordinates to generate.
Default Value: 0.20
Number of coordinates to generate.
(3)Cell Type
Default Value: 0.00
What sort of interpolation from cells" corners towards their centers.
Default Value: 0.00
What sort of interpolation from cells" corners towards their centers.
(4)Gradient Invert
Default Value: 0.00
If to invert gradient from cells" corners towards their centers.
Default Value: 0.00
If to invert gradient from cells" corners towards their centers.
(5)Mix Blend
Default Value: 0.00
How much (mixing) the mask impacts the input drawn onto the other input.
Default Value: 0.00
How much (mixing) the mask impacts the input drawn onto the other input.
Isc KeyXOR1
Inputs: 2
Parameters: 4
IntrinsicFX
KeyXOR1
Using the value from XOR ink between input1 and input2, as transparency instead of showing the XOR ink value...
|
IntrinsicFX KeyXOR1
Using the value from XOR ink between input1 and input2, as transparency instead of showing the XOR ink value... |
ID: ix0yVersion: 2.6Parameters: 4Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 1.00
Blend for the keying, if zero, only render input 1.
Default Value: 1.00
Blend for the keying, if zero, only render input 1.
(2)Inverse
Default Value: 1.00
Invert the color values of input 2, experimental.
Default Value: 1.00
Invert the color values of input 2, experimental.
(3)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
(4)XOR 3<>1 3<>2
Default Value: 0.00
Missing parameter descriptions will come later.
Default Value: 0.00
Missing parameter descriptions will come later.
Isc KeyBumpMap1
Inputs: 2
Parameters: 3
IntrinsicFX
KeyBumpMap1
Using a bumpmapping formulae (calculating normals for each 3 neighbour pixels in 3D (x,y, brightness = z) and uses this to determine transparency.
Note: I used blur on input 1 before the effect..
|
IntrinsicFX KeyBumpMap1
Using a bumpmapping formulae (calculating normals for each 3 neighbour pixels in 3D (x,y, brightness = z) and uses this to determine transparency. Note: I used blur on input 1 before the effect.. |
ID: ix03Version: 2.6Parameters: 3Inputs: 2System: PC or Mac
Parameters
Parameters
(1)Dist Min
Default Value: 0.00
The minimum of the bump/displacement effect when the bump-producing input is of brightness zero.
Default Value: 0.00
The minimum of the bump/displacement effect when the bump-producing input is of brightness zero.
(2)Dist Max
Default Value: 1.00
The maximum of the bump/displacement effect when the bump-producing input is of brightness max.
Default Value: 1.00
The maximum of the bump/displacement effect when the bump-producing input is of brightness max.
(3)Switch 1 2
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Default Value: 0.00
Use input 1 as input 2, and input 2 as input 1, switch inputs!
Additional Info
-
Vendor:
IntrinsicFX
-
Product Type:
FreeFrame, Legacy CPU, Pack
-
Item Type:
Pack, Showcase
-
Product Model:
Mix With Keys (IFX514V26FF10)