@ 
Showcase FreeFrame Packs Plasma Plasma 2.6
Showcase FreeFrame Packs Plasma Plasma 2.6
Plasma Plasma 2.6
A pack with plasmalike effects. There are several variations, some that add some random elements to the effects (PlasmaNoise ones). This is a traditional "demo scene" effect, but here with several variations over the formulae.
Isc PlasmaNoise1
Inputs: 1
Parameters: 13
IntrinsicFX
PlasmaNoise1
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 1 of 3.
..
|
IntrinsicFX PlasmaNoise1
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 1 of 3.
.. |
ID: iz0jVersion: 2.6Parameters: 13Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.52
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.52
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.57
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.57
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.55
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.55
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.43
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.43
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.50
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.50
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.10
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.10
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.07
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.07
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.37
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.37
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 1.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 1.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Random Seed
Default Value: 0.31
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
Default Value: 0.31
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
(12)Blend
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
(13)Bleed
Default Value: 0.00
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Default Value: 0.00
Switch > 0.5 gives input + plasma processed. <= 0.5 gives input multiplied with plasma processed and capped at zero and max color component values.
Isc PlasmaNoise2
Inputs: 1
Parameters: 12
IntrinsicFX
PlasmaNoise2
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 2 of 3...
|
IntrinsicFX PlasmaNoise2
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 2 of 3... |
ID: iz0kVersion: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.41
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.41
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.56
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.56
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.55
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.55
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.51
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.51
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.25
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.25
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.15
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.15
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.02
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.02
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.34
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.34
Lets you choose from 4 slightly different types of plasma effect.
(11)Random Seed
Default Value: 0.88
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
Default Value: 0.88
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
(12)Blend
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc PlasmaNoise3
Inputs: 1
Parameters: 12
IntrinsicFX
PlasmaNoise3
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 3 of 3.
..
|
IntrinsicFX PlasmaNoise3
Liquid plasma, very dynamic due to its randomness and animation from noise added to lookup tables. Version 3 of 3.
.. |
ID: iz0lVersion: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.52
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.52
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.49
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.49
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.44
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.44
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.18
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.18
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.33
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.33
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.00
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.00
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.15
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.15
Lets you choose from 4 slightly different types of plasma effect.
(11)Random Seed
Default Value: 1.00
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
Default Value: 1.00
With this parameter you can set 1000 different fixed random seeds, to recreate same animation in the noise data: the value is calculated as (parameter value * 1000.0)^2 (squared).
(12)Blend
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.25
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc Plasma1
Inputs: 1
Parameters: 12
IntrinsicFX
Plasma1
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry wit..
|
IntrinsicFX Plasma1
Extra wild plasma effect. It generates a high contrast plasma and this is influenced by the video input. A more subtle output can be achieved using the last Blend parameter and blending it wet/dry wit.. |
ID: iz0eVersion: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.40
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.40
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.10
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Blend
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
(12)Limit
Default Value: 0.00
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Default Value: 0.00
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc Plasma2
Inputs: 1
Parameters: 11
IntrinsicFX
Plasma2
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/..
|
IntrinsicFX Plasma2
A slightly more subtle plasma effect. It generates a smooth plasma and this is influenced by the video input. A even smoother output can be achieved using the last Blend parameter and blending it wet/.. |
ID: iz0fVersion: 2.6Parameters: 11Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.20
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.20
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.50
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.50
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.10
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Blend
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc Plasma3
Inputs: 1
Parameters: 11
IntrinsicFX
Plasma3
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be ac..
|
IntrinsicFX Plasma3
A plasma effect much like IscPlasma2 but with added influence of "difference" from the video input. It generates a plasma that is highly influenced by the video input. A even smoother output can be ac.. |
ID: iz0gVersion: 2.6Parameters: 11Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.47
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.47
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.46
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.46
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.52
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.52
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.55
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.55
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.21
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.21
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Blend
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc Plasma4
Inputs: 1
Parameters: 11
IntrinsicFX
Plasma4
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input..
|
IntrinsicFX Plasma4
This plasma effect is very different from the others in its shape. But it has the same parameters as the other ones for modification. It generates a plasma that is mildly influenced by the video input.. |
ID: iz0hVersion: 2.6Parameters: 11Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.47
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.47
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.50
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.54
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.54
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.47
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.47
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.23
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.21
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.21
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.10
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.00
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Blend
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.00
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Isc Plasma5
Inputs: 1
Parameters: 12
IntrinsicFX
Plasma5
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is als..
|
IntrinsicFX Plasma5
This plasma effect is also different from the others in its shape. It has the same parameters as the other ones for modification. It generates a plasma that is very strong in color-contrast and is als.. |
ID: iz0iVersion: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Freq Temp
Default Value: 0.95
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
Default Value: 0.95
Frequency temperature. Controls the detail level of the plasma - increasing this to max gives a "bigger" wobbling plasma. Reducing it gives smaller wobbles. This parameter is like a zoom parameter.
(2)Rot Step 1
Default Value: 0.51
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.51
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(3)Rot Step 2
Default Value: 0.47
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.47
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(4)Rot Step 3
Default Value: 0.56
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.56
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(5)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(6)Mul2
Default Value: 0.46
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.46
Multiplication parameter - try this for variating the plasma shape.
(7)Mul3
Default Value: 0.00
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.00
Multiplication parameter - try this for variating the plasma shape.
(8)Zoom Offs X
Default Value: 0.20
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.20
Zoom offset horizontally (x axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(9)Zoom Offs Y
Default Value: 0.20
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
Default Value: 0.20
Zoom offset vertically (y axis). Gives control of where to zoom (Freq Temp) from - so you can make it zoom not only from the bottom left.
(10)Sin Mods
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
Default Value: 0.00
Lets you choose from 4 slightly different types of plasma effect.
(11)Blend
Default Value: 0.50
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
Default Value: 0.50
Wet/Dry mix for the effect. Mix the input with the output gradually. Default is min, which gives only output.
(12)Limit
Default Value: 0.00
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Default Value: 0.00
Controls limiting (off/on) when the plasma is added to the input, if color exceeds max: cap or loop it.
Isc Plasma6
Inputs: 1
Parameters: 12
IntrinsicFX
Plasma6
Plasma with added displace..
|
IntrinsicFX Plasma6
Plasma with added displace.. |
ID: iz2jVersion: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Sin Mods
Default Value: 0.00
Different modes of sinus modification for the plasma calculation, gives different patterns.
Default Value: 0.00
Different modes of sinus modification for the plasma calculation, gives different patterns.
(2)Freq Temp
Default Value: 0.40
The frequency, multiplication for indexing the sinus lookup for the plasma table for processing each pixel.
Default Value: 0.40
The frequency, multiplication for indexing the sinus lookup for the plasma table for processing each pixel.
(3)Strength
Default Value: 0.50
The strength of the plasma effect onto the input.
Default Value: 0.50
The strength of the plasma effect onto the input.
(4)Invert
Default Value: 1.00
If to invert the plasma when calculated, switches plus and minus.
Default Value: 1.00
If to invert the plasma when calculated, switches plus and minus.
(5)Rot Step 1
Default Value: 0.51
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.51
The first of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(6)Rot Step 2
Default Value: 0.47
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.47
The second of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(7)Rot Step 3
Default Value: 0.56
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
Default Value: 0.56
The last of three rotation parameters for morphing the plasma (makes it wave). The default is just a tiny bit movement - adjust this higher or lower than the middle to make it morph/animate/move faster.
(8)Mul1
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.20
Multiplication parameter - try this for variating the plasma shape.
(9)Mul2
Default Value: 0.46
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.46
Multiplication parameter - try this for variating the plasma shape.
(10)Mul3
Default Value: 0.00
Multiplication parameter - try this for variating the plasma shape.
Default Value: 0.00
Multiplication parameter - try this for variating the plasma shape.
(11)Zoom Offs X
Default Value: 0.20
Zoom the indexing horizontally / along x-axis as to produce "wider" changes, smoothing out in width.
Default Value: 0.20
Zoom the indexing horizontally / along x-axis as to produce "wider" changes, smoothing out in width.
(12)Zoom Offs Y
Default Value: 0.20
Zoom the indexing horizontally / along y-axis as to produce "taller" changes, smoothing out in height.
Default Value: 0.20
Zoom the indexing horizontally / along y-axis as to produce "taller" changes, smoothing out in height.
Additional Info
-
Vendor:
IntrinsicFX
-
Product Type:
FreeFrame, Legacy CPU, Pack
-
Item Type:
Pack, Showcase
-
Product Model:
Plasma Plasma (IFX504V26FF10)