@ 
Showcase FreeFrame Packs Wave, Blur & Deform 2.6
Showcase FreeFrame Packs Wave, Blur & Deform 2.6
Wave, Blur & Deform 2.6
Assorted effects. Some experimental luma zooming. Some fast blur effects, SineWaves that wave the video, some with a twist, and separate processing of colors, and the LumaZoom effects zoom only the, you guessed it, luma! Quite cool effect when used together with blur first then the LumaZooms. And not to forget the classic twirl effect.
Isc LumaZoom1
Inputs: 1
Parameters: 5
IntrinsicFX
LumaZoom1
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in..
|
IntrinsicFX LumaZoom1
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in.. |
ID: iz2cVersion: 2.6Parameters: 5Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Source Value
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed.
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed.
(2)Source Range
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed.
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed.
(3)Max Zoom
Default Value: 0.50
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom2 in that this effect uses quadratic distance as zooming, and the LumaZoom1 use
Default Value: 0.50
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom2 in that this effect uses quadratic distance as zooming, and the LumaZoom1 use
(4)Rotation
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
(5)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc CameraShake1
Inputs: 1
Parameters: 8
IntrinsicFX
CameraShake1
Tired of very mechanic motions of camera? or animated / rendered input video that looks too rigid? This plugin animates the frame, and makes sure there is no tile/spill even if rotated and/or transpos..
|
IntrinsicFX CameraShake1
Tired of very mechanic motions of camera? or animated / rendered input video that looks too rigid? This plugin animates the frame, and makes sure there is no tile/spill even if rotated and/or transpos.. |
ID: ix18Version: 2.6Parameters: 8Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Shake Amount
Default Value: 0.15
Controls a frame-by-frame positioning in x and y in addition to the interval processing. [tip]If you want only interval processing (more realistic) turn this parameter down to 0.0[/tip].
Default Value: 0.15
Controls a frame-by-frame positioning in x and y in addition to the interval processing. [tip]If you want only interval processing (more realistic) turn this parameter down to 0.0[/tip].
(2)Jump Amount
Default Value: 0.20
Controls the amount of sudden change when one interval has passed and before the next, for intervals see interval parameters below.
Default Value: 0.20
Controls the amount of sudden change when one interval has passed and before the next, for intervals see interval parameters below.
(3)Time Step
Default Value: 0.15
The step rate for the interval processing, the speed the intervals are traversed.
Default Value: 0.15
The step rate for the interval processing, the speed the intervals are traversed.
(4)Interval Min
Default Value: 0.30
First of two parameters controlling the interval length, a random value betweein IntervalMin (this parameter) and IntervalMax is chosen each time a new interval is to be processed. [tip]Set Max and Min to same value and u get a constant interval[/tip].
Default Value: 0.30
First of two parameters controlling the interval length, a random value betweein IntervalMin (this parameter) and IntervalMax is chosen each time a new interval is to be processed. [tip]Set Max and Min to same value and u get a constant interval[/tip].
(5)Interval Max
Default Value: 0.75
The Max Interval value, see IntervalMin. Set Max == Min to get a constant interval, else a random interval between max and min is chosen for each interval processing. Lower max than min makes the values switch som min is used as max, and vice versa. Low value gives faster shake effect.
Default Value: 0.75
The Max Interval value, see IntervalMin. Set Max == Min to get a constant interval, else a random interval between max and min is chosen for each interval processing. Lower max than min makes the values switch som min is used as max, and vice versa. Low value gives faster shake effect.
(6)Rotation Amount
Default Value: 0.30
Sets the max rotation change from the input to the output. Intervals makes the rotation random in amount, but this parameter controls the max allowed.
Default Value: 0.30
Sets the max rotation change from the input to the output. Intervals makes the rotation random in amount, but this parameter controls the max allowed.
(7)Sideways Amount
Default Value: 0.25
Sets the max side-to-side change from the input to the output. Intervals makes the sideways position random, but this parameter controls the max allowed. Please note: a large value here will scale the image up quite a bit to make sure anything outside the edges of the input is seen.
Default Value: 0.25
Sets the max side-to-side change from the input to the output. Intervals makes the sideways position random, but this parameter controls the max allowed. Please note: a large value here will scale the image up quite a bit to make sure anything outside the edges of the input is seen.
(8)UpDown Amount
Default Value: 0.25
Sets the max up and down change from the input to the output. Intervals makes the up / down position random, but this parameter controls the max allowed. Please note: a large value here will scale the image up quite a bit to make sure anything outside the edges of the input is seen.
Default Value: 0.25
Sets the max up and down change from the input to the output. Intervals makes the up / down position random, but this parameter controls the max allowed. Please note: a large value here will scale the image up quite a bit to make sure anything outside the edges of the input is seen.
Isc LumaZoom2
Inputs: 1
Parameters: 6
IntrinsicFX
LumaZoom2
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in..
|
IntrinsicFX LumaZoom2
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in.. |
ID: iz2dVersion: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Source Value
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed.
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed.
(2)Source Range
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed.
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed.
(3)Max Zoom
Default Value: 0.30
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom1 in that this effect uses circular distance as zooming, and the LumaZoom1 uses
Default Value: 0.30
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom1 in that this effect uses circular distance as zooming, and the LumaZoom1 uses
(4)Multiply
Default Value: 0.00
Lets you zoom/tile the input when luma zoomed. Default = no extra zoom/tiling.
Default Value: 0.00
Lets you zoom/tile the input when luma zoomed. Default = no extra zoom/tiling.
(5)Rotation
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
(6)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc LumaZoom3
Inputs: 1
Parameters: 5
IntrinsicFX
LumaZoom3
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in..
|
IntrinsicFX LumaZoom3
These effects zooms the pixels based on a range in brightness. Very cool effect when used on colored input together with PeteGaussianBlur (a free freeframe effect). They differ a bit from eachother in.. |
ID: iz2iVersion: 2.6Parameters: 5Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Source Value
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed. Difference from LumaZoom1 and 2 is that this range is used on a per color channel basis.. so red, green and bl
Default Value: 0.30
The brightness to use as source for luma zooming. Together with Source Range it forms a range of brightness from input that will be luma zoomed. Difference from LumaZoom1 and 2 is that this range is used on a per color channel basis.. so red, green and bl
(2)Source Range
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed. Difference from LumaZoom1 and 2 is that this range is used on a per color channel basis.. so red, green and blue are handled differently according to their values
Default Value: 0.30
The range +/- in brightness from the Source Value to define the range that gets luma zoomed. Difference from LumaZoom1 and 2 is that this range is used on a per color channel basis.. so red, green and blue are handled differently according to their values
(3)Max Zoom
Default Value: 0.50
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom2 in that this effect uses quadratic distance as zooming, and the LumaZoom1 use
Default Value: 0.50
The max zoom amount. zoom amount varies based on source input brightness per pixel. For coolest results use PeteGaussianBlur before this effect. Also this differs from LumaZoom2 in that this effect uses quadratic distance as zooming, and the LumaZoom1 use
(4)Rotation
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
Default Value: 0.00
Lets you rotate the zoomed pixels and not the other pixels around center of screen. Default = no rotation.
(5)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc SineWave1
Inputs: 1
Parameters: 6
IntrinsicFX
SineWave1
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para..
|
IntrinsicFX SineWave1
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para.. |
ID: iz1vVersion: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Sine Start
Default Value: 0.00
The start in angle of the sine wave.
Default Value: 0.00
The start in angle of the sine wave.
(2)Sine Step
Default Value: 0.50
Determines the number of waves across the screen.
Default Value: 0.50
Determines the number of waves across the screen.
(3)Sine Strength X
Default Value: 0.30
How much to twist, the strength of the sinewave in x (horizontal).
Default Value: 0.30
How much to twist, the strength of the sinewave in x (horizontal).
(4)Step Auto
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
(5)Sine Strength Y
Default Value: 0.00
How much to twist, the strength of the sinewave in y (vertical).
Default Value: 0.00
How much to twist, the strength of the sinewave in y (vertical).
(6)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc SineWave2
Inputs: 1
Parameters: 6
IntrinsicFX
SineWave2
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para..
|
IntrinsicFX SineWave2
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para.. |
ID: iz1wVersion: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Sine StartY
Default Value: 0.00
Base position vertically for the sine calculation.
Default Value: 0.00
Base position vertically for the sine calculation.
(2)Vert Step Y
Default Value: 0.80
The vertical stepping (number of waves) of the sinewave.
Default Value: 0.80
The vertical stepping (number of waves) of the sinewave.
(3)Horiz Step Y
Default Value: 0.33
The horizontal stepping (number of waves) for this effect.
Default Value: 0.33
The horizontal stepping (number of waves) for this effect.
(4)Step Auto
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
(5)Sine Strength Y
Default Value: 0.64
How much to twist, the strength of the sinewave in y (vertical).
Default Value: 0.64
How much to twist, the strength of the sinewave in y (vertical).
(6)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc SineWave3
Inputs: 1
Parameters: 6
IntrinsicFX
SineWave3
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para..
|
IntrinsicFX SineWave3
These effects sinewaves the input horizontally and vertically so it pulsates, using different algorithm for each of these fx. Also you can either control it fixed or animated automatically. Check para.. |
ID: iz1xVersion: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Sine StartY
Default Value: 0.00
Base position vertically for the sine calculation.
Default Value: 0.00
Base position vertically for the sine calculation.
(2)Vert Step Y
Default Value: 0.50
The vertical stepping (number of waves) of the sinewave.
Default Value: 0.50
The vertical stepping (number of waves) of the sinewave.
(3)Horiz Step Y
Default Value: 0.50
The horizontal stepping (number of waves) for this effect.
Default Value: 0.50
The horizontal stepping (number of waves) for this effect.
(4)Step Auto
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
Default Value: 0.64
If this is more or less than 0.5 the sinewave will be animated on a per frame basis. Default is this on (for ease of use in Resolume f.ex.). Turn this to exactly 0.5 if you want to animate fixed yourself.
(5)Sine Strength Y
Default Value: 0.50
How much to twist, the strength of the sinewave in y (vertical).
Default Value: 0.50
How much to twist, the strength of the sinewave in y (vertical).
(6)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc Twirl1
Inputs: 1
Parameters: 5
IntrinsicFX
Twirl1
Twirls the image around center...
|
IntrinsicFX Twirl1
Twirls the image around center... |
ID: iz2fVersion: 2.6Parameters: 5Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Twirl
Default Value: 0.50
The twirl amount +/-. default this is not used, it is only used with Twirl Auto = 0.0. For animating yourself. default is auto animated.
Default Value: 0.50
The twirl amount +/-. default this is not used, it is only used with Twirl Auto = 0.0. For animating yourself. default is auto animated.
(2)Rotate
Default Value: 0.00
The rotation +/-. default this is not used, it is only used with Rotate Auto = 0.0. For animating yourself. default is auto animated.
Default Value: 0.00
The rotation +/-. default this is not used, it is only used with Rotate Auto = 0.0. For animating yourself. default is auto animated.
(3)Twirl Auto
Default Value: 0.15
Auto stepping for twirling, this runs in a circular motion. if 0.0 you can use Twirl to set the twirl amount explicitly.
Default Value: 0.15
Auto stepping for twirling, this runs in a circular motion. if 0.0 you can use Twirl to set the twirl amount explicitly.
(4)Rotate Auto
Default Value: 0.15
Auto stepping for rotation, this runs in a circular motion. if 0.0 you can use Rotate to set the rotation explicitly.
Default Value: 0.15
Auto stepping for rotation, this runs in a circular motion. if 0.0 you can use Rotate to set the rotation explicitly.
(5)Mix
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Default Value: 0.00
Dry/Wet mix/blend of input vs output. Default = full effect.
Isc FastBlur1
Inputs: 1
Parameters: 5
IntrinsicFX
FastBlur1
FastBlur is a blockblur effect and can be controlled both horizontally and vertically...
|
IntrinsicFX FastBlur1
FastBlur is a blockblur effect and can be controlled both horizontally and vertically... |
ID: iz20Version: 2.6Parameters: 5Inputs: 1System: PC or Mac
Parameters
Parameters
(1)H Blur Fine
Default Value: 0.30
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.30
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
(2)H Blur Coarse
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
(3)V Blur Fine
Default Value: 0.30
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.30
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
(4)V Blur Coarse
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
(5)Mix Blend
Default Value: 0.00
Mix of wet/dry. Default = full effect.
Default Value: 0.00
Mix of wet/dry. Default = full effect.
Isc FastBlur2
Inputs: 1
Parameters: 10
IntrinsicFX
FastBlur2
Same as FastBlur1 but with the added parameters to separate a range in color red green blue so you get some un-blurred parts...
|
IntrinsicFX FastBlur2
Same as FastBlur1 but with the added parameters to separate a range in color red green blue so you get some un-blurred parts... |
ID: iz21Version: 2.6Parameters: 10Inputs: 1System: PC or Mac
Parameters
Parameters
(1)H Blur Fine
Default Value: 0.50
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.50
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
(2)H Blur Coarse
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
(3)V Blur Fine
Default Value: 0.50
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.50
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
(4)V Blur Coarse
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
(5)Red
Default Value: 0.50
The RED value of the color to separate for not bluring.
Default Value: 0.50
The RED value of the color to separate for not bluring.
(6)Green
Default Value: 0.50
The GREEN value of the color to separate for not bluring.
Default Value: 0.50
The GREEN value of the color to separate for not bluring.
(7)Blue
Default Value: 0.50
The BLUE value of the color to separate for not bluring.
Default Value: 0.50
The BLUE value of the color to separate for not bluring.
(8)Alpha
Default Value: 0.50
Alpha value addition to the color parameters, controlling alpha-range to blur in addition, requires 32bit data.
Default Value: 0.50
Alpha value addition to the color parameters, controlling alpha-range to blur in addition, requires 32bit data.
(9)Range
Default Value: 0.20
The range from +/- the color defined by red, green and blue, the range to not blur. Everything outside range is blurred.
Default Value: 0.20
The range from +/- the color defined by red, green and blue, the range to not blur. Everything outside range is blurred.
(10)Mix Blend
Default Value: 0.00
Wet/Dry mix, default full effect.
Default Value: 0.00
Wet/Dry mix, default full effect.
Isc FastBlur3
Inputs: 1
Parameters: 8
IntrinsicFX
FastBlur3
Same as FastBlur1 but with the added parameters to separate a range in brightness so you get some un-blurred parts (also an inverse parameter for setting the outside-range to blurred or inside-range...
|
IntrinsicFX FastBlur3
Same as FastBlur1 but with the added parameters to separate a range in brightness so you get some un-blurred parts (also an inverse parameter for setting the outside-range to blurred or inside-range... |
ID: iz22Version: 2.6Parameters: 8Inputs: 1System: PC or Mac
Parameters
Parameters
(1)H Blur Fine
Default Value: 0.50
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.50
Horizontal blur fine detail. this is combined with the blur coarse to form the blur amount.
(2)H Blur Coarse
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Horizontal blur coarse detail. this is combined with the blur fine to form the blur amount.
(3)V Blur Fine
Default Value: 0.50
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
Default Value: 0.50
Vertical blur fine detail. this is combined with the blur coarse to form the blur amount.
(4)V Blur Coarse
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
Default Value: 0.00
Vertical blur coarse detail. this is combined with the blur fine to form the blur amount.
(5)Brightness
Default Value: 0.50
The brightness value to use for defining the range to be blurred/not blurred (see Inverse).
Default Value: 0.50
The brightness value to use for defining the range to be blurred/not blurred (see Inverse).
(6)Range
Default Value: 0.17
The range from the Brightness value to blur/not blur (see Inverse).
Default Value: 0.17
The range from the Brightness value to blur/not blur (see Inverse).
(7)Inverse
Default Value: 0.00
Define if to blur outside range or inside range. Default = blur inside range. Only switch > 0.5 = inversed (blend outside color).
Default Value: 0.00
Define if to blur outside range or inside range. Default = blur inside range. Only switch > 0.5 = inversed (blend outside color).
(8)Mix Blend
Default Value: 0.00
Wet/Dry mix, default full effect.
Default Value: 0.00
Wet/Dry mix, default full effect.
Isc FastBlur4
Inputs: 1
Parameters: 9
IntrinsicFX
FastBlur4
FastBlur is a blockblur effect and can be controlled both horizontally and vertically. This one with a picture in picture opposite area, either blur inside or outside...
|
IntrinsicFX FastBlur4
FastBlur is a blockblur effect and can be controlled both horizontally and vertically. This one with a picture in picture opposite area, either blur inside or outside... |
ID: ix25Version: 2.6Parameters: 9Inputs: 1System: PC or Mac
Parameters
Parameters
(1)H Blur Fine
Default Value: 0.30
Fine adjustment for horizontal blur.
Default Value: 0.30
Fine adjustment for horizontal blur.
(2)H Blur Coarse
Default Value: 0.00
Coarse blur adjustment horizontal.
Default Value: 0.00
Coarse blur adjustment horizontal.
(3)V Blur Fine
Default Value: 0.30
Fine adjustment of vertical blur.
Default Value: 0.30
Fine adjustment of vertical blur.
(4)V Blur Coarse
Default Value: 0.00
Coarse blur adjustment vertical.
Default Value: 0.00
Coarse blur adjustment vertical.
(5)Mix Blend
Default Value: 0.00
Wet / dry mix
Default Value: 0.00
Wet / dry mix
(6)Crop Ctr X
Default Value: 0.50
The center of the cropped area (X).
Default Value: 0.50
The center of the cropped area (X).
(7)Crop Ctr Y
Default Value: 0.50
The center of the cropped area (Y).
Default Value: 0.50
The center of the cropped area (Y).
(8)Crop Size
Default Value: 0.25
The size of the cropped area.
Default Value: 0.25
The size of the cropped area.
(9)Blur Inside
Default Value: 0.00
Whether to blur inside or outside.
Default Value: 0.00
Whether to blur inside or outside.
Additional Info
-
Vendor:
IntrinsicFX
-
Product Type:
FreeFrame, Legacy CPU, Pack
-
Item Type:
Pack, Showcase
-
Product Model:
Wave, Blur & Deform (IFX503V26FF10)