@ 
Showcase FreeFrame Packs Colmatic 2.6
Showcase FreeFrame Packs Colmatic 2.6
Colmatic 2.6
Assorted effects that manipulate the colors of the video input. Some of these are traditional effects that control f.ex. brightness and contrast, and some are color manipulations based on weird formulas that can produce interesting experimental results.
Isc BrightnContr1
Inputs: 1
Parameters: 4
IntrinsicFX
BrightnContr1
Straight brightness contrast effect, its as fast as it gets!..
|
IntrinsicFX BrightnContr1
Straight brightness contrast effect, its as fast as it gets!.. |
ID: iz1zVersion: 2.6Parameters: 4Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Contrast
Default Value: 0.66
Controls the contrast. 0.5 = no adjustment, less than 0.5 = less contrast, above 0.5 = more contrast. Default = slightly more contrast.
Default Value: 0.66
Controls the contrast. 0.5 = no adjustment, less than 0.5 = less contrast, above 0.5 = more contrast. Default = slightly more contrast.
(2)Bright Mul
Default Value: 0.33
Brightness by multiplying the color channels. Default = less brightness.
Default Value: 0.33
Brightness by multiplying the color channels. Default = less brightness.
(3)Bright Add
Default Value: 0.50
Brightness by addition. Default = no addition in color.
Default Value: 0.50
Brightness by addition. Default = no addition in color.
(4)Blend
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Isc BrightnContr2
Inputs: 1
Parameters: 6
IntrinsicFX
BrightnContr2
Adjust contrast separately for Red Green and Blue part of input, brightness is common for all...
|
IntrinsicFX BrightnContr2
Adjust contrast separately for Red Green and Blue part of input, brightness is common for all... |
ID: iz26Version: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red Contrast
Default Value: 0.75
Separate contrast adjusting on the RED channel, the red value of the color. Default = slightly more contrast.
Default Value: 0.75
Separate contrast adjusting on the RED channel, the red value of the color. Default = slightly more contrast.
(2)Green Contrast
Default Value: 0.68
Separate contrast adjusting on the GREEN channel, the green value of the color. Default = slightly more contrast.
Default Value: 0.68
Separate contrast adjusting on the GREEN channel, the green value of the color. Default = slightly more contrast.
(3)Blue Contrast
Default Value: 0.60
Separate contrast adjusting on the BLUE channel, the blue value of the color. Default = slightly more contrast.
Default Value: 0.60
Separate contrast adjusting on the BLUE channel, the blue value of the color. Default = slightly more contrast.
(4)Bright Mul
Default Value: 0.33
Brightness by multiplying the color channels. Default = less brightness.
Default Value: 0.33
Brightness by multiplying the color channels. Default = less brightness.
(5)Bright Add
Default Value: 0.50
Brightness by addition. Default = no addition in color.
Default Value: 0.50
Brightness by addition. Default = no addition in color.
(6)Blend
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Isc BrightnContr3
Inputs: 1
Parameters: 10
IntrinsicFX
BrightnContr3
Adjust both brightness and contrast for Red Green and Blue part of input separately (more parameters than the other brightness contrast fx)...
|
IntrinsicFX BrightnContr3
Adjust both brightness and contrast for Red Green and Blue part of input separately (more parameters than the other brightness contrast fx)... |
ID: iz2hVersion: 2.6Parameters: 10Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red Contrast
Default Value: 0.75
Separate contrast adjusting on the RED channel, the red value of the color. Default = slightly more contrast.
Default Value: 0.75
Separate contrast adjusting on the RED channel, the red value of the color. Default = slightly more contrast.
(2)Green Contrast
Default Value: 0.68
Separate contrast adjusting on the GREEN channel, the green value of the color. Default = slightly more contrast.
Default Value: 0.68
Separate contrast adjusting on the GREEN channel, the green value of the color. Default = slightly more contrast.
(3)Blue Contrast
Default Value: 0.60
Separate contrast adjusting on the BLUE channel, the blue value of the color. Default = slightly more contrast.
Default Value: 0.60
Separate contrast adjusting on the BLUE channel, the blue value of the color. Default = slightly more contrast.
(4)Red Mul
Default Value: 0.55
Brightness by multiplying the color channel RED. Default = a bit more brightness.
Default Value: 0.55
Brightness by multiplying the color channel RED. Default = a bit more brightness.
(5)Green Mul
Default Value: 0.44
Brightness by multiplying the color channel GREEN. Default = a bit less brightness.
Default Value: 0.44
Brightness by multiplying the color channel GREEN. Default = a bit less brightness.
(6)Blue Mul
Default Value: 0.34
Brightness by multiplying the color channel BLUE. Default = a bit less brightness.
Default Value: 0.34
Brightness by multiplying the color channel BLUE. Default = a bit less brightness.
(7)Red Add
Default Value: 0.47
Brightness of RED by addition to red value. Default = slightly less color red.
Default Value: 0.47
Brightness of RED by addition to red value. Default = slightly less color red.
(8)Green Add
Default Value: 0.37
Brightness of GREEN by addition to green value. Default = slightly less color green.
Default Value: 0.37
Brightness of GREEN by addition to green value. Default = slightly less color green.
(9)Blue Add
Default Value: 0.23
Brightness of BLUE by addition to blue value. Default = less color blue.
Default Value: 0.23
Brightness of BLUE by addition to blue value. Default = less color blue.
(10)Blend
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Default Value: 0.00
Mixer parameter - mixes wet/dry for the effect. Defaults to only effect output.
Isc Tantric1
Inputs: 1
Parameters: 8
IntrinsicFX
Tantric1
Weird color manipulation schemes/formulas make the "Tantric" series interesting manipulating almost any input, specially input with shades of specific colors. This is the first in the series. These ar..
|
IntrinsicFX Tantric1
Weird color manipulation schemes/formulas make the "Tantric" series interesting manipulating almost any input, specially input with shades of specific colors. This is the first in the series. These ar.. |
ID: iz0pVersion: 2.6Parameters: 8Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 0.41
Wet/Dry mix of input and output.
Default Value: 0.41
Wet/Dry mix of input and output.
(2)Red
Default Value: 0.67
Formulae red color adjustment.
Default Value: 0.67
Formulae red color adjustment.
(3)Green
Default Value: 0.47
Formulae green color adjustment.
Default Value: 0.47
Formulae green color adjustment.
(4)Blue
Default Value: 0.67
Formulae blue color adjustment.
Default Value: 0.67
Formulae blue color adjustment.
(5)Red Inv
Default Value: 0.34
Inverted Red color adjustment.
Default Value: 0.34
Inverted Red color adjustment.
(6)Green Inv
Default Value: 0.81
Inverted green color adjustment.
Default Value: 0.81
Inverted green color adjustment.
(7)Blue Inv
Default Value: 0.67
Inverted blue color adjustment.
Default Value: 0.67
Inverted blue color adjustment.
(8)Nr Folds
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Isc Tantric2
Inputs: 1
Parameters: 8
IntrinsicFX
Tantric2
Another "Tantric" weird formula for color manipulation. This, the second in the series, is a bit like the first - but using sin(values) to produce something different than the first. A pure result of ..
|
IntrinsicFX Tantric2
Another "Tantric" weird formula for color manipulation. This, the second in the series, is a bit like the first - but using sin(values) to produce something different than the first. A pure result of .. |
ID: iz0qVersion: 2.6Parameters: 8Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 0.14
Wet/Dry mix of input and output.
Default Value: 0.14
Wet/Dry mix of input and output.
(2)Red
Default Value: 0.64
Formulae red color adjustment.
Default Value: 0.64
Formulae red color adjustment.
(3)Green
Default Value: 1.00
Formulae green color adjustment.
Default Value: 1.00
Formulae green color adjustment.
(4)Blue
Default Value: 0.67
Formulae blue color adjustment.
Default Value: 0.67
Formulae blue color adjustment.
(5)Red Add 1
Default Value: 0.25
"Add to color red" adjustment.
Default Value: 0.25
"Add to color red" adjustment.
(6)Green Add 1
Default Value: 0.15
"Add to color green" adjustment.
Default Value: 0.15
"Add to color green" adjustment.
(7)Blue Add 1
Default Value: 0.20
"Add to color blue" adjustment.
Default Value: 0.20
"Add to color blue" adjustment.
(8)Nr Folds
Default Value: 0.18
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.18
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Isc Tantric3
Inputs: 1
Parameters: 8
IntrinsicFX
Tantric3
Another "Tantric" weird formula for color manipulation. This, the third in the series, is another weird twist of a formulae for calculating new colors into a lookup table. Also has the "folds" paramet..
|
IntrinsicFX Tantric3
Another "Tantric" weird formula for color manipulation. This, the third in the series, is another weird twist of a formulae for calculating new colors into a lookup table. Also has the "folds" paramet.. |
ID: iz0rVersion: 2.6Parameters: 8Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 0.41
Wet/Dry mix of input and output.
Default Value: 0.41
Wet/Dry mix of input and output.
(2)Red
Default Value: 0.67
Formulae red color adjustment.
Default Value: 0.67
Formulae red color adjustment.
(3)Green
Default Value: 0.47
Formulae green color adjustment.
Default Value: 0.47
Formulae green color adjustment.
(4)Blue
Default Value: 0.67
Formulae blue color adjustment.
Default Value: 0.67
Formulae blue color adjustment.
(5)Red Inv
Default Value: 0.34
Inverted Red color adjustment.
Default Value: 0.34
Inverted Red color adjustment.
(6)Green Inv
Default Value: 0.81
Inverted green color adjustment.
Default Value: 0.81
Inverted green color adjustment.
(7)Blue Inv
Default Value: 0.67
Inverted blue color adjustment.
Default Value: 0.67
Inverted blue color adjustment.
(8)Nr Folds
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Isc Tantric4
Inputs: 1
Parameters: 9
IntrinsicFX
Tantric4
Another "Tantric" weird formula for color manipulation. This, the fourth in the series, is another weird twist of a formulae for calculating new colors into a lookup table. Also has the "folds" parame..
|
IntrinsicFX Tantric4
Another "Tantric" weird formula for color manipulation. This, the fourth in the series, is another weird twist of a formulae for calculating new colors into a lookup table. Also has the "folds" parame.. |
ID: iz0sVersion: 2.6Parameters: 9Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 0.60
Wet/Dry mix of input and output.
Default Value: 0.60
Wet/Dry mix of input and output.
(2)Red
Default Value: 0.69
Formulae red color adjustment.
Default Value: 0.69
Formulae red color adjustment.
(3)Green
Default Value: 0.50
Formulae green color adjustment.
Default Value: 0.50
Formulae green color adjustment.
(4)Blue
Default Value: 0.55
Formulae blue color adjustment.
Default Value: 0.55
Formulae blue color adjustment.
(5)Red Add
Default Value: 0.33
"Add to color red" adjustment.
Default Value: 0.33
"Add to color red" adjustment.
(6)Green Add
Default Value: 0.69
"Add to color green" adjustment.
Default Value: 0.69
"Add to color green" adjustment.
(7)Blue Add
Default Value: 0.75
"Add to color blue" adjustment.
Default Value: 0.75
"Add to color blue" adjustment.
(8)Nr Folds 1
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.30
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
(9)Nr Folds 2
Default Value: 0.01
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.01
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Isc Tantric5
Inputs: 1
Parameters: 10
IntrinsicFX
Tantric5
Another "Tantric" weird formula for color manipulation. This, the fifth/last in the series, is another weird twist of a formulae for calculating new colors into a lookup table. It has the most "folds"..
|
IntrinsicFX Tantric5
Another "Tantric" weird formula for color manipulation. This, the fifth/last in the series, is another weird twist of a formulae for calculating new colors into a lookup table. It has the most "folds".. |
ID: iz0tVersion: 2.6Parameters: 10Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Blend
Default Value: 0.24
Wet/Dry mix of input and output.
Default Value: 0.24
Wet/Dry mix of input and output.
(2)Red
Default Value: 0.44
Formulae red color adjustment.
Default Value: 0.44
Formulae red color adjustment.
(3)Green
Default Value: 0.32
Formulae green color adjustment.
Default Value: 0.32
Formulae green color adjustment.
(4)Blue
Default Value: 0.23
Formulae blue color adjustment.
Default Value: 0.23
Formulae blue color adjustment.
(5)Red Add
Default Value: 0.00
"Add to color red" adjustment.
Default Value: 0.00
"Add to color red" adjustment.
(6)Green Add
Default Value: 0.00
"Add to color green" adjustment.
Default Value: 0.00
"Add to color green" adjustment.
(7)Blue Add
Default Value: 0.00
"Add to color blue" adjustment.
Default Value: 0.00
"Add to color blue" adjustment.
(8)Nr Folds 1
Default Value: 0.82
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.82
Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
(9)Nr Folds 2
Default Value: 0.71
Another "folds" parameter. Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.71
Another "folds" parameter. Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
(10)Nr Folds 3
Default Value: 0.20
Yet another "folds" parameter. Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Default Value: 0.20
Yet another "folds" parameter. Number of "folds", ramps in the colors. This produces a special pattern when used on input that contains smooth gradient ramps.
Isc Huealizer1
Inputs: 1
Parameters: 4
IntrinsicFX
Huealizer1
Colorize effect...
|
IntrinsicFX Huealizer1
Colorize effect... |
ID: iz1yVersion: 2.6Parameters: 4Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red
Default Value: 0.80
Red value to hue to (colorize).
Default Value: 0.80
Red value to hue to (colorize).
(2)Green
Default Value: 0.69
Green value to hue to (colorize).
Default Value: 0.69
Green value to hue to (colorize).
(3)Blue
Default Value: 0.30
Blue value to hue to (colorize).
Default Value: 0.30
Blue value to hue to (colorize).
(4)Blend
Default Value: 0.00
Wet/Dry mix, default = full effect.
Default Value: 0.00
Wet/Dry mix, default = full effect.
Isc RGBSwitch1
Inputs: 1
Parameters: 3
IntrinsicFX
RGBSwitch1
This effect lets you exchange color channels with eachother, or change the order of them. Also has a parameter (Order Blend) for blending between the orders available. And you can also mix it with the..
|
IntrinsicFX RGBSwitch1
This effect lets you exchange color channels with eachother, or change the order of them. Also has a parameter (Order Blend) for blending between the orders available. And you can also mix it with the.. |
ID: iz0nVersion: 2.6Parameters: 3Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Order
Default Value: 0.73
The orders are as follows (from min to max value of this parameter): RGB (normal as input), RBG, BRG, BGR, GRB, GBR, and then back to RGB again. Use the parameter Order Blend to blend from one (the selected) towards the next in this order.
Default Value: 0.73
The orders are as follows (from min to max value of this parameter): RGB (normal as input), RBG, BRG, BGR, GRB, GBR, and then back to RGB again. Use the parameter Order Blend to blend from one (the selected) towards the next in this order.
(2)Order Blend
Default Value: 0.86
Adjust the mix of the selected order and the next order in the available orders.
Default Value: 0.86
Adjust the mix of the selected order and the next order in the available orders.
(3)Blend
Default Value: 1.00
Wet/Dry mix, blend the unmodified input with the modified output. Default is only output.
Default Value: 1.00
Wet/Dry mix, blend the unmodified input with the modified output. Default is only output.
Isc RGBOffset1
Inputs: 1
Parameters: 7
IntrinsicFX
RGBOffset1
Offsets color channels of video input. You can control the Red, Green and Blue Offset to move each color-layer both horizontally and vertically (along the X and Y axis)...
|
IntrinsicFX RGBOffset1
Offsets color channels of video input. You can control the Red, Green and Blue Offset to move each color-layer both horizontally and vertically (along the X and Y axis)... |
ID: iz0mVersion: 2.6Parameters: 7Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Offset Red X
Default Value: 0.51
Horizontal offset (X axis) for the red color channel. Defaults to "almost" no offset.
Default Value: 0.51
Horizontal offset (X axis) for the red color channel. Defaults to "almost" no offset.
(2)Offset Red Y
Default Value: 0.51
Vertical offset (Y axis) for the red color channel. Defaults to "almost" no offset.
Default Value: 0.51
Vertical offset (Y axis) for the red color channel. Defaults to "almost" no offset.
(3)Offset Green X
Default Value: 0.51
Horizontal offset (X axis) for the green color channel. Defaults to "almost" no offset.
Default Value: 0.51
Horizontal offset (X axis) for the green color channel. Defaults to "almost" no offset.
(4)Offset Green Y
Default Value: 0.51
Vertical offset (Y axis) for the green color channel. Defaults to "almost" no offset.
Default Value: 0.51
Vertical offset (Y axis) for the green color channel. Defaults to "almost" no offset.
(5)Offset Blue X
Default Value: 0.51
Horizontal offset (X axis) for the blue color channel. Defaults to "almost" no offset.
Default Value: 0.51
Horizontal offset (X axis) for the blue color channel. Defaults to "almost" no offset.
(6)Offset Blue Y
Default Value: 0.51
Vertical offset (Y axis) for the blue color channel. Defaults to "almost" no offset.
Default Value: 0.51
Vertical offset (Y axis) for the blue color channel. Defaults to "almost" no offset.
(7)Blend
Default Value: 0.00
Wet/Dry mix, blend gradually the output with the unmodified input. Defaults to only output.
Default Value: 0.00
Wet/Dry mix, blend gradually the output with the unmodified input. Defaults to only output.
Isc PalScale1
Inputs: 1
Parameters: 6
IntrinsicFX
PalScale1
Scale down the palette to different granularity realtime. It reduces the number of different colors for red, green and blue separately. The Red, Green and Blue Mul parameters lets you multiply the res..
|
IntrinsicFX PalScale1
Scale down the palette to different granularity realtime. It reduces the number of different colors for red, green and blue separately. The Red, Green and Blue Mul parameters lets you multiply the res.. |
ID: iz0dVersion: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red Scale
Default Value: 0.20
Scale down the number of red colors/valeurs/nuances. Default is scaled down.
Default Value: 0.20
Scale down the number of red colors/valeurs/nuances. Default is scaled down.
(2)Green Scale
Default Value: 0.20
Scale down the number of green colors/valeurs/nuances. Default is scaled down.
Default Value: 0.20
Scale down the number of green colors/valeurs/nuances. Default is scaled down.
(3)Blue Scale
Default Value: 0.20
Scale down the number of blue colors/valeurs/nuances. Default is scaled down.
Default Value: 0.20
Scale down the number of blue colors/valeurs/nuances. Default is scaled down.
(4)Red Mul
Default Value: 0.75
Multiplication value for the red color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
Default Value: 0.75
Multiplication value for the red color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
(5)Green Mul
Default Value: 0.75
Multiplication value for the green color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
Default Value: 0.75
Multiplication value for the green color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
(6)Blue Mul
Default Value: 0.75
Multiplication value for the blue color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
Default Value: 0.75
Multiplication value for the blue color values special weird results. Less than middle gives a negative multiplication and thus it can result in an inverted output.
Isc Metalizer1
Inputs: 1
Parameters: 5
IntrinsicFX
Metalizer1
Color manipulation makes image seem more metallic. Strange formula hard to describe. It takes the Red, Green and Blue Add and multiplies it with a sin() of the pixel RGB. And then mixes it using Col M..
|
IntrinsicFX Metalizer1
Color manipulation makes image seem more metallic. Strange formula hard to describe. It takes the Red, Green and Blue Add and multiplies it with a sin() of the pixel RGB. And then mixes it using Col M.. |
ID: iz0cVersion: 2.6Parameters: 5Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red Add
Default Value: 0.14
Special Red value to use for this strange formula.
Default Value: 0.14
Special Red value to use for this strange formula.
(2)Green Add
Default Value: 0.14
Special Green value to use for this strange formula.
Default Value: 0.14
Special Green value to use for this strange formula.
(3)Blue Add
Default Value: 0.14
Special Blue value to use for this strange formula.
Default Value: 0.14
Special Blue value to use for this strange formula.
(4)Color Mul
Default Value: 0.00
As described in the effect description. Mix amount.
Default Value: 0.00
As described in the effect description. Mix amount.
(5)Blend
Default Value: 0.00
Wet/Dry mix. Mix the output with the video input. Default - only output - no mix with the input.
Default Value: 0.00
Wet/Dry mix. Mix the output with the video input. Default - only output - no mix with the input.
Isc Desaturate1
Inputs: 1
Parameters: 2
IntrinsicFX
Desaturate1
Desaturates gradually the video input...
|
IntrinsicFX Desaturate1
Desaturates gradually the video input... |
ID: iz05Version: 2.6Parameters: 2Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Saturation
Default Value: 0.10
Adjust the gradual saturation of colors.
Default Value: 0.10
Adjust the gradual saturation of colors.
(2)Use Blue
Default Value: 0.50
if > 0.5 = use only blue color as reference, Under (default = normal desaturate.
Default Value: 0.50
if > 0.5 = use only blue color as reference, Under (default = normal desaturate.
Isc ColorField1
Inputs: 1
Parameters: 12
IntrinsicFX
ColorField1
Creates a colored and outlined area on video where the video is colored differently...
|
IntrinsicFX ColorField1
Creates a colored and outlined area on video where the video is colored differently... |
ID: ix41Version: 2.6Parameters: 12Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Limit
Default Value: 0.40
Limit is at which color-brightness the border appears.
Default Value: 0.40
Limit is at which color-brightness the border appears.
(2)Area Red
Default Value: 0.44
Colorized area: colorize rgb red component.
Default Value: 0.44
Colorized area: colorize rgb red component.
(3)Area Green
Default Value: 0.50
Colorized area: colorize rgb green component.
Default Value: 0.50
Colorized area: colorize rgb green component.
(4)Area Blue
Default Value: 0.64
Colorized area: colorize rgb blue component.
Default Value: 0.64
Colorized area: colorize rgb blue component.
(5)Border Red
Default Value: 0.05
Border color rgb red component.
Default Value: 0.05
Border color rgb red component.
(6)Border Green
Default Value: 0.10
Border color rgb green component.
Default Value: 0.10
Border color rgb green component.
(7)Border Blue
Default Value: 0.25
Border color rgb blue component.
Default Value: 0.25
Border color rgb blue component.
(8)Contrast
Default Value: 0.80
Control contrast within the colorized area.
Default Value: 0.80
Control contrast within the colorized area.
(9)Invert
Default Value: 0.25
Inverts the color transformation of the colorized area.
Default Value: 0.25
Inverts the color transformation of the colorized area.
(10)Invert Limit
Default Value: 0.75
Limits the color transformation when inverted, as to loop output colors or not.
Default Value: 0.75
Limits the color transformation when inverted, as to loop output colors or not.
(11)Cut Brightness
Default Value: 0.30
The center value for the defining range of the brightness & contrast adjustment is done inside the colorized area.
Default Value: 0.30
The center value for the defining range of the brightness & contrast adjustment is done inside the colorized area.
(12)Cut Range
Default Value: 0.44
The max color-space distance from the "Brightness" center value for defining the range of the brightness & contrast adjustment is done inside the colorized area.
Default Value: 0.44
The max color-space distance from the "Brightness" center value for defining the range of the brightness & contrast adjustment is done inside the colorized area.
Isc ColorMix1
Inputs: 1
Parameters: 6
IntrinsicFX
ColorMix1
Modifies pixel colors (based on parameters) of video input...
|
IntrinsicFX ColorMix1
Modifies pixel colors (based on parameters) of video input... |
ID: iz03Version: 2.6Parameters: 6Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Red Scale
Default Value: 0.20
Scales the red color from 255 shades gradually down to just one color.
Default Value: 0.20
Scales the red color from 255 shades gradually down to just one color.
(2)Green Scale
Default Value: 0.20
Scales the green color from 255 shades gradually down to just one color.
Default Value: 0.20
Scales the green color from 255 shades gradually down to just one color.
(3)Blue Scale
Default Value: 0.20
Scales the blue color from 255 shades gradually down to just one color.
Default Value: 0.20
Scales the blue color from 255 shades gradually down to just one color.
(4)Mix Strength
Default Value: 1.00
Wet / Dry mix. Blend between the scaled color and the input video unmodified.
Default Value: 1.00
Wet / Dry mix. Blend between the scaled color and the input video unmodified.
(5)Contrast
Default Value: 0.00
Multiplication of color - works like contrast kindof.
Default Value: 0.00
Multiplication of color - works like contrast kindof.
(6)Chop
Default Value: 0.00
Chops the color so it actually loops around red green blue values instead of being limited - Gives interesting effects. This parameter is below 0.5 = off, above 0.5 = on.
Default Value: 0.00
Chops the color so it actually loops around red green blue values instead of being limited - Gives interesting effects. This parameter is below 0.5 = off, above 0.5 = on.
Isc ColorMix2
Inputs: 1
Parameters: 11
IntrinsicFX
ColorMix2
It uses the color specified by Red , Green and Blue Col (makes a truecolor RGB value) and measures the distance in color space to the pixel/RGB being processed. If it is within the threshold (one thre..
|
IntrinsicFX ColorMix2
It uses the color specified by Red , Green and Blue Col (makes a truecolor RGB value) and measures the distance in color space to the pixel/RGB being processed. If it is within the threshold (one thre.. |
ID: iz04Version: 2.6Parameters: 11Inputs: 1System: PC or Mac
Parameters
Parameters
(1)Saturation
Default Value: 0.00
Adjust the gradual saturation of colors further away from the selected color and threshold values.
Default Value: 0.00
Adjust the gradual saturation of colors further away from the selected color and threshold values.
(2)Red Col
Default Value: 0.80
The red value of the color to find and use as a perfect match for color to keep.
Default Value: 0.80
The red value of the color to find and use as a perfect match for color to keep.
(3)Green Col
Default Value: 0.80
The green value color to find and use as a perfect match for color to keep.
Default Value: 0.80
The green value color to find and use as a perfect match for color to keep.
(4)Blue Col
Default Value: 0.89
The blue value color to find and use as a perfect match for color to keep.
Default Value: 0.89
The blue value color to find and use as a perfect match for color to keep.
(5)Red Threshold
Default Value: 0.40
The max distance in red value (from the exact red value in Red Col). This span +/- from Red Col gives a gradual desaturate based on the Saturation amount
Default Value: 0.40
The max distance in red value (from the exact red value in Red Col). This span +/- from Red Col gives a gradual desaturate based on the Saturation amount
(6)Green Threshold
Default Value: 0.60
The max distance in green value (from the exact green value in Green Col). This span +/- from Green Col gives a gradual desaturate based on the Saturation amount
Default Value: 0.60
The max distance in green value (from the exact green value in Green Col). This span +/- from Green Col gives a gradual desaturate based on the Saturation amount
(7)Blue Threshold
Default Value: 0.50
The max distance in blue value (from the exact red value in Blue Col). This span +/- from Blue Col gives a gradual desaturate based on the Saturation amount
Default Value: 0.50
The max distance in blue value (from the exact red value in Blue Col). This span +/- from Blue Col gives a gradual desaturate based on the Saturation amount
(8)Invert
Default Value: 0.80
Inverts the colors. > 0.5 = invert - under 0.5 = do not invert.
Default Value: 0.80
Inverts the colors. > 0.5 = invert - under 0.5 = do not invert.
(9)Inv Src
Default Value: 0.20
Invert source value multiplication, a bit complicated to describe - must be tried out :)
Default Value: 0.20
Invert source value multiplication, a bit complicated to describe - must be tried out :)
(10)Inv Dest
Default Value: 0.80
Invert multiplication of color. (from -1.5 to 1.5). Also a bit hard to explain, try it out!
Default Value: 0.80
Invert multiplication of color. (from -1.5 to 1.5). Also a bit hard to explain, try it out!
(11)Inv Threshold
Default Value: 0.00
Invert threshold
Default Value: 0.00
Invert threshold
Additional Info
-
Vendor:
IntrinsicFX
-
Product Type:
FreeFrame, Legacy CPU, Pack
-
Item Type:
Pack, Showcase
-
Product Model:
Colmatic (IFX501V26FF10)